IDENTIFICATION

ENGINE IDENTIFICATION


BRIGGS AND STRATTON ENGINE IDENTIFICATION
GENERAC ENGINE IDENTIFICATION
HONDA ENGINE IDENTIFICATION
HYDRO-GEAR ENGINE IDENTIFICATION
KOHLER ENGINE IDENTIFICATION
KUBOTA ENGINE IDENTIFICATION
TECUMSEH ENGINE IDENTIFICATION

EQUIPMENT IDENTIFICATION

MANUFACTURERS INFORMATION NEEDED FOR PARTS ORDERS

WHERE TO FIND THE ENGINE DATA TAG


MANUFACTURERS INFORMATION NEEDED FOR WHOLE GOODS PARTS ORDERS


Most whole goods have a manufacturer data tag in plain site.
For riding lawn mowers this tag is usually under the seat.
For push mowers the tag is usually on the rear most surface of the mower deck.
For items like generators and pressure washers look on the frame
and some times on the engine.

If you are needing engine parts,
find the info for engine identification
on this same page.


RETURN TO THE INDEX

MANUFACTURERS INFORMATION NEEDED FOR BRIGGS AND STRATTON ENGINE PARTS ORDERS



The Model, Type, and Code numbers are needed.
Good Examples
(Model 10A902)
(Type 1102-B1)
(Code 991016)
CLICK HERE TO FIND OUT HOW TO LOCATE YOUR MODEL TYPE AND CODE (PRODUCTION DATE CODE)


These numbers can be found in various locations on Briggs & Stratton Engines.
Look near spark plugs on metal starter housings, stamped numbers in the metal.
Look Under plastic covers over pull start housings,
sometimes they are stamped on or near the spark plug,
on the metal pull start housing, yet hidden by the
top cover on small 4.0 hp and engines.
Look on Muffler Guards, sometimes they are stamped
on metal parts near the muffler.
Look on the Valve Cover or Rocker Arm Cover for numbers stamped.
Sometimes you will find a printed lable and metal stampings,
use the metal stamped number if the numbers are different.

CLICK HERE TO SEE A VIDEO ON HOW TO LOCATE YOUR ENGINE MODEL TYPE AND CODE
ONCE YOU OPEN THIS VIDEO SELECT "LOCATE YOUR ENGINE MODEL TYPE" THE VIDEO WILL SHOW YOU SEVERAL PRODUCTS AND THE LOCATIONS OF THE
MODEL - TYPE - CODE
NEEDED TO IDENTIFY YOUR ENGINE AND PARTS NEEDED FOR YOUR ENGINE


MANUFACTURERS INFORMATION NEEDED FOR GENERAC ENGINE PARTS ORDERS

IF YOU ARE HOLDING THE
ENGINE WITH THE
STARTER ON THE LEFT AND
CRANKSHAFT ON THE RIGHT,
THE LABELS SHOULD BE
IN FRONT OF YOU.

THE INFORMATION WE NEED
IS THE MODEL NUMBER
FOUND AT THE TOP OF THIS LABEL
Ex:'09878-1'

WE ALSO NEED THE
ENGINE IDENTIFICATION NUMBER
Ex:'EHC-00951-1'


RETURN TO THE INDEX

MANUFACTURERS INFORMATION NEEDED FOR HONDA ENGINE PARTS ORDERS

AND TO BUY A NEW HONDA ENGINE.


If you are wanting to buy a new Honda Engine or buy parts, you must have the engine numbers which can be found on your engine.
Look for stamped numbers on the side of the engine.
Without the engine running, put your left hand on the flywheel or recoil starter side of the engine and your right hand on the PTO or output shaft side of the engine. The numbers you need will be on the side of the engine facing you.
Look for stamped numbers on the lowest portion of the engine,
look low on the side of the engine block, about an inch or so above the oil drain plug.
Model numbers are usually on the face of pull starters,
such as GX-340.
We need Model numbers, type number (specification number), and a serial number.
Good example
(Model number GX390)Again, found on the recoil starter.
(Spec code QA2) found on the side of the engine mentioned above.
(Serial Number GCAA-22222456) found above or near the Spec code.



GX ENGINE SPEC CODE

GC ENGINE SPEC CODE
RETURN TO THE INDEX

HYDRO-GEAR ENGINE IDENTIFICATION

MANUFACTURERS INFORMATION NEEDED FOR TECUMSEH ENGINE PARTS ORDERS


WHERE TO FIND THE ENGINE DATA TAG
Look for a lable on the side of the engine.
Needed are the Model, Spec, and Date of Manufacturer (DOM)
Good examples
(Model HM100) (Spec 360499E) (DOM 02609)
Most all the time the Model number is listed and the
spec number is just to the right of the Model number
with the DOM just to the right of the Spec number.
All 3 numbers on one line left to right Model, spec, DOM.

MANUFACTURERS INFORMATION NEEDED FOR KOHLER ENGINE PARTS ORDERS

AND TO BUY A NEW KOHLER ENGINE.


KOHLER ENGINES ILLUSTRATED PARTS LISTS CLICK ON THE ENTER AS GUEST BUTTON TO ENTER THE SITE
YOU WILL NEED YOUR

MODEL NUMBER AND SPEC NUMBER

FROM THE ENGINE DATA TAG LOCATED ON THE ENGINE.

KOLER ENGINE

MANUFACTURERS INFORMATION NEEDED FOR KUBOTA ENGINE PARTS ORDERS.

LOCATION OF KUBOTA ENGINE SERIAL NUMBER LOCATIONS.

________________________________________________________________________________

TO IDENTIFY YOUR ROBIN SUBARU ENGINE, MODEL, SPECIFICATION, AND CODE

HOW TO IDENTIFY YOUR MODEL,
SPECIFICATION, AND CODE


HOW TO IDENTIFY YOUR MODEL,
SPECIFICATION, AND CODE

Robin Subaru engines are identified by MODEL, SPECIFICATIONS, and CODE NUMBER. For each model there may be different versions called specifications. Each specification will be unique in some way. The difference may only be the paint color or it may have a different type of PTO or some other significant difference.

In order to identify the correct service part number, it is important to confirm the specification and code numbers for your engine. The specification and code number together are known as the PRODUCT NUMBER.

All Robin Subaru 4 cycle engines have a Product Number label similar to the illustration to the left.


RETURN TO THE INDEX

PHONE ORDERS

WE NOW ACCEPT PHONE ORDERS!


This web site has been made available to you for the enhancement of the services we provide to our customers. We've provided a number of resources here to help you resolve Generator and Pressure Washer problems, find parts you need, and suggest improvements to our service.



Copyright 2014
AAAA Generator and Pressure Washer, Inc.
DBA:ARKANSAS OUTDOOR POWER EQUIPMENT
All rights reserved.
Last modified: FEBUARY 10, 2014

All products mentioned are registered trademarks or trademarks of their respective companies.


RETURN TO THE INDEX